Skip to main content

Contract Status Actions

This article will walk you through how to change your contract statuses using status actions.

With the launch of the contract statuses and lifecycle features, all contracts in Ironclad reflect their current status across the product.

However, contract statuses are continuously evolving through amendments, supersessions, terminations, and other business decisions. In order to reflect the ever changing future of contract statuses, Ironclad gives you the ability to change your contract statuses using status actions, which can be accessed by clicking on the status pill located in the Repository or metadata panel.

Any user with edit access to a record can use status action to change the record’s status.

IMPORTANT
Today, status actions are meant to manually reflect changes to contracts’ statuses as a result of business decisions/other contracts, rather than initiating them.

For example, is if you select Terminate on a record, it will not kick off a termination workflow, or send a termination notice letter to the counterparty. You can, however, relate a record that contains the associated termination notice letter.

This feature is based on the assumption that the event has already happened and the user is now indicating the same in the product.

Contract Status Actions

There are a variety of actions you can take on a record. The available actions on a contract automatically adjust based on the contract’s status and renewal type. Refer to the table and images below for a list of contract status actions and available actions based on a contracts’ status:

Action

Scenario

Outcome

Inputs Needed

Considerations

Terminate

An active contract was terminated and needs to be marked as such.

The current contract becomes inactive terminated. If the termination effective date is in the future the contract is active but the sub status is terminating. The record with the termination contract if it exists is related to the existing contract.

Termination Date, Termination Effective Date and optionally the related termination record.

Supersede

A new contract was signed which replaces the existing contract and makes the existing contract inactive. The superseding contract is the one governing the terms for the relationship going forward.

The current contract becomes inactive on the superseding contract’s effective date, the newly signed contract which superseded it is related to it.

Superseded Date, Superseding contract effective date, and optionally, the related record that the contract has been superseded by.

Cancel Auto-Renewal

The contract will now expire on its expiration date, instead of auto-renewing.

The contract expires and becomes inactive on its expiration date instead of auto-renewing.

None, the cancellation date is automatically stored.

Activate

A contract has expired in the past. For example, it is currently inactive, but another contract is signed which makes the existing contract active again.

Contract becomes active again with a new current effective date/renewal terms

New effective date, and renewal type. Additional inputs based on the renewal type may be required.

  1. Effective Date cannot be left blank

  2. If needed, the Expiration Date cannot be less than effective date

  3. For renewal types auto-renew and optional extension, the renewal term length has to be populated

Extend

A contract has the renewal type of optional extension and the customer chooses to exercise the extension.

Status changes to extending, and the contract expiration date is moved forward by the renewal term length on the expiration date, times renewed is incremented, and renewals remaining is decremented.

None

Edit Renewal

A user should be allowed to edit the renewal information for an active contract’s agreement, such that the future lifecycle events happen accordingly. For example, when an amendment is signed that changes the next expiration date or increases the number of renewals left for a contract.

The future lifecycle of the contract should follow the updated values rather than the historical

Pre-filled values from current lifecycle data:

  1. Expiration Date

  2. Renewal Type

  3. If Auto-Renewal/Optional Extension then Renewal Term Length, Renewals Remaining, Renewal Opt Out Date

  1. When editing the renewal, if the renewal type is none, auto-renew, optional extension, or other, the expiration date cannot be left blank.

  2. For renewal type auto-renew and optional extension, the renewal term length has to be populated

  3. The expiration date cannot be less than the effective date of the contract

  4. For evergreen contracts, if an effective date is not present, it must first be populated via the metadata panel

Undo

The last action that the user took was invalid.

Rolls back the effects from the last contract action, as if they were never performed.

None

Auto Renewal Images

image - 2025-04-08T202518.660.png
image - 2024-04-11T225542.966.png

Terminating Images

image - 2024-04-11T225607.763.png
image - 2024-04-11T225631.813.png

Superseding Images

image - 2024-04-11T225654.065.png
image - 2024-04-11T225715.282.png

Activating Images

image - 2024-04-11T225732.875.png
image - 2024-04-11T225749.560.png

Extend Images

image - 2024-04-11T225808.341.png
image - 2024-04-11T225830.201.png

Auto-Renewing Images

image - 2024-04-11T225900.615.png
image - 2024-04-11T225922.101.png

Available Actions Based on Contract Status

Refer to the table below for a list of available actions based on a contracts’ status:

Current Status

Renewal Type

Expected Available Actions

Active
​
​

None/Blank/Other

Edit Renewal

Active
​
​

None/Blank/Other

Terminate

Active
​
​

None/Blank/Other

Supersede

Active
​
​

None/Blank/Other

Undo

Active
​
​

Auto-Renew

Edit Renewal

Active
​
​

Auto-Renew

Terminate

Active
​
​

Auto-Renew

Supersede

Active
​
​

Auto-Renew

Cancel Autorenewal (only if remaining renewals > 0)

Active
​
​

Auto-Renew

Undo*

Active
​
​

Optional Extension

Edit Renewal

Active
​
​

Optional Extension

Terminate

Active
​
​

Optional Extension

Supersede

Active
​
​

Optional Extension

Extend (only if remaining renewals > 0)

Active
​
​

Optional Extension

Undo

Active
​
​

Evergreen

Edit Renewal

Active
​
​

Evergreen

Terminate

Active
​
​

Evergreen

Supersede

Active
​
​

Evergreen

Undo

Active - Superseding

All Renewal Types

Terminate, Undo

Active - Terminating

All Renewal Types

Undo

Active - Extending

Only possible for Optional Extensions

Edit Renewal

Active - Extending

Only possible for Optional Extensions

Terminate

Active - Extending

Only possible for Optional Extensions

Supersede

Active - Extending

Only possible for Optional Extensions

Undo

Inactive - Expired

None/Blank/Other/Auto-Renew

Edit Renewal

Inactive - Expired

None/Blank/Other/Auto-Renew

Supersede

Inactive - Expired

None/Blank/Other/Auto-Renew

Activate

Inactive - Expired

None/Blank/Other/Auto-Renew

Undo

Inactive - Expired

Optional Extension

Edit Renewal

Inactive - Expired

Optional Extension

Supersede

Inactive - Expired

Optional Extension

Extend (only if remaining renewals > 0)

Inactive - Expired

Optional Extension

Undo

Inactive - Terminated/Superseded

All Renewal Types

Undo

Inactive - Executed

None/Blank/Other

Edit Renewal

Inactive - Executed

None/Blank/Other

Terminate

Inactive - Executed

None/Blank/Other

Supersede

Inactive - Executed

None/Blank/Other

Undo

Inactive - Executed

Auto-Renew

Edit Renewal

Inactive - Executed

Auto-Renew

Terminate

Inactive - Executed

Auto-Renew

Supersede

Inactive - Executed

Auto-Renew

Cancel Autorenewal (only if remaining renewals > 0)

Inactive - Executed

Auto-Renew

Undo

Inactive - Executed

Optional Extension

Edit Renewal

Inactive - Executed

Optional Extension

Terminate

Inactive - Executed

Optional Extension

Supersede

Inactive - Executed

Optional Extension

Extend (only if remaining renewals > 0)

Inactive - Executed

Optional Extension

Undo

Inactive - Executed

Evergreen

Edit Renewal

Inactive - Executed

Evergreen

Terminate

Inactive - Executed

Evergreen

Supersede

Inactive - Executed

Evergreen

Undo


Status Overrides

Errors can occur when you input contract data. Contract statuses are calculated on the basis of contract data and any errors in that data will lead to invalid statuses.

Status overrides provide a way for you to correct these errors and recompute the entire lifecycle of the contract as if the correct information had been entered from the start.

Any time the data in a record’s lifecycle preset property is modified via the metadata panel, API, or metadata import, a recalculation of the contract lifecycle is triggered as if the new values for those properties were the original values for that contract.

image - 2025-04-08T202537.730.png

NOTE

If you would like to change lifecycle data when amendments happen as a means of reflecting future states, please use contract status actions.

Did this answer your question?